Stamped Wall Drawings
As mentioned on Page 22, site specific design drawings may need to be submitted to the local regulatory agency for approval and/or construction drawings are desired for tender purposes. Oaks can assist with that. Wall cross sections and elevation views generated by VESPA can be imported directly into AutoCAD to make a clear and comprehensive drawing package complete with material quantities, color coding of different units for easy identification during construction, wall layouts complete with grid locations/lengths for the entire wall, and applicable details to ensure a quality installation.
We provide stamped drawings!
QUANTITIES
SITE PLAN
LEGEND
Key Plan
NOTES:
SAMPLE LAYOUT
WALL LAYOUTS
DETAILS
100mm [4.0"] DIA. MINIMUM DRAINPIPE ELEVATION VARIES (SEE BELOW)
100mm [4.0"] TEE
www.adengineering.ca FAX 905-898-1998 Office: 1201 Nicholson Road, Suite 200 Newmarket, ON L3Y 9C3 Toll Free 1-855-998-3514 Email: info@adengineering.ca 905-898-3514
MAXIMUM 15m [45'-0"] SPACING
DAYLIGHT DRAINPIPE THROUGH WALL FACE AND EXTEND AS REQUIRED (FOR TOE SLOPES)
WHEN USING DRAINPIPES, REMOVE PORTION OF UNIT AS SHOWN ADJACENT TO ALLOW DRAINPIPE THROUGH FACE WHEN USING WALL DRAIN PRO (PHOTO ADJACENT), TRIM UNIT AS REQUIRED TO MAINTAIN BOND LINES.
No.
Description
Date
DRAINPIPE OR WALL DRAIN PRO THROUGH WALL FACE
DRAINPIPE THROUGH WALL FACE
300mm [12.0"] OF GRAVEL FILL (FREE-DRAINING AGGREGATE)
300mm [12.0"] OF GRAVEL FILL (FREE-DRAINING AGGREGATE)
8°
8°
FINISHED GRADE
FINISHED GRADE
100mm [4.0"] DIA. MINIMUM DRAINPIPE (SET ELEVATION TO DRAIN)
100mm [4.0"] DIA. MINIMUM DRAINPIPE AT BACK OF BOTTOMMOST WALL BLOCK
COMPACTED GRANULAR TO BOTTOM OF DRAINPIPE
150mm [6.0"] MINIMUM COMPACTED GRANULAR-BASE LEVELING PAD
150mm [6.0"] MINIMUM COMPACTED GRANULAR-BASE LEVELING PAD
FLAT FINISHED GRADE AT WALL TOE
SLOPED FINISHED GRADE AT WALL TOE
1
GRADING REVISED
MAR 08 2019
Project Name
217 TORONTO STREET NEW PROTERRA RETAINING WALLS
Client
Address
MARKDALE, ONTARIO 217 TORONTO STREET
Scale:
AS NOTED
Date:
19-FEB-19
DH
Designed:
DH
Drawn:
#190111 08-MAR-19
Proj. Eng.:
TC
Approved:
TC
Sheet:
RW-1 (1 OF 2)
Title
PLAN AND LAYOUT PROTERRA RETAINING WALL
Project Number
190111
Below is an example of a mosaic in a wall. This particular wall is adjacent to a wave pool, so the contractor decided to incorporate a wave into the wall itself. Where a mosaic is desired, we can show exactly what the mosaic will look like on the wall layout (see above). Because every unit in the wall is shown on the layout, there is no guess work onsite during construction – in essence, we are providing a large scale Lego kit complete with instructions.
Wall: Proterra™ Split and Smooth, Greyfield
26
Powered by FlippingBook